In March of 2003, Congressman John Conyers Jr. out of Michigan introduced a bill to Congress called the United States Toxic Mold Safety and Protection Act.
This Bill says that the Centers for Disease Control and the Environmental Protection agency will be responsible for examining the effects of different kinds of mold on the health of human beings and they will research and develop more accurate results of the serious problems that are presented by the presence of mold in human habitats.
This Bill will also direct the Department of Housing and Urban Development and the Environmental Protection Agency to establish a certain number of items that will constitute the conditions that will cause mold to grow indoors and will outline what can be done in order to inhibit this growth. These guidelines will not only address the causes of mold growth and what can be done to prevent it, but also the inspection, testing, and remediation techniques.
The Bill also says that you could receive tax credits for the inspection and/or removal and remediation of any mold in the home or business.
Grants will be given for the removal of mold in any and all buildings accessible by the public.
It also will create what it calls a National Toxic Mold Insurance Program that will be administered by FEMA (the Federal Emergency Management Agency) in order to protect home and business owners from any crippling financial losses, because most insurance companies do not provide insurance for mold at all or what they do provide is inadequate.
It will also necessitate the modification of building codes in local areas in order to keep the risk of mold infections in newly built homes and other buildings down.
This bill will also require mold inspections for apartment complexes and any other multi-unit residential property. Public housing is also subject to these mandatory mold inspections.
Victims of mold health complications will also be covered by Medicaid if they do not have any other health care in place at the time.
It has also authorized the establishment of different public information programs that will educate the public about the hazards of mold that is allowed to grow indoors. It is believed that an educated public is better prepared to defend itself against these hazards.
For more information, please visit http://www.house.gov/conyers/mold.htm . If you support this bill, please contact your congressman.
Jim Corkern is a writer and promoter of quality
water damage restoration companies and
Dallas Residential Water Damage Restoration Contractors.
Saturday, September 29, 2007
Saturday, September 8, 2007
Protecting Your Deck From Water Damage
Waterproofing your deck that you worked so hard to pay for or to build is something that most homeowners need to do to keep their deck in good condition over the years. It will likely be used extensively and you want to keep it looking as good and as structurally sound as possible. Mold and rotting can occur to decks that are not properly waterproofed, so the deck’s structural integrity is also under scrutiny. Water from a pool or rain or snow can cause the water damage to your deck that you are trying to avoid, so applying a water sealant to the deck will help prevent all of this.
Waterproofing a new deck is not very different from waterproofing one that already exists on a property, but you should wait at least 30 days before you do, because the chemicals in the wood the deck was built with will need time to evaporate and the wood will need time to adjust to its new environment. After you have waited a month, you can start waterproofing the deck.
Clean off the entire deck and remove all furniture. It should be made completely bare and free of all debris, including leaves, sticks, pool toys, and etcetera. You can purchase a cleaner for the deck from most department stores. Follow the directions and apply it with a pump sprayer. When it starts foaming up, get a brush with stiff bristles and start scrubbing the surface of the deck firmly. This will not only remove all the dirt and other buildup from the deck, but also help to remove stains such as grease. After you are done, rinse all of the foam off with your garden hose or a few buckets of water. When you are doing this, you should be wearing eye protection.
Applying the sealant will be done with a roller or a pump sprayer and if there are any puddles of the sealant on the deck, you will have to roll them out so that the sealant coats the deck evenly.
Drilling a few small holes in your deck where water collects can also help further waterproof it. This will let the water drain off of the deck in these areas. They can be as big or as small as you want them to be, although 3/16 of an inch is about the smallest you can get that will allow for a decent amount of drainage.
Jim Corkern is a writer and promoter of quality
Texas Residential Water Damage Restoration Contractors and
Water Damage Restoration companies across the united states.
Waterproofing a new deck is not very different from waterproofing one that already exists on a property, but you should wait at least 30 days before you do, because the chemicals in the wood the deck was built with will need time to evaporate and the wood will need time to adjust to its new environment. After you have waited a month, you can start waterproofing the deck.
Clean off the entire deck and remove all furniture. It should be made completely bare and free of all debris, including leaves, sticks, pool toys, and etcetera. You can purchase a cleaner for the deck from most department stores. Follow the directions and apply it with a pump sprayer. When it starts foaming up, get a brush with stiff bristles and start scrubbing the surface of the deck firmly. This will not only remove all the dirt and other buildup from the deck, but also help to remove stains such as grease. After you are done, rinse all of the foam off with your garden hose or a few buckets of water. When you are doing this, you should be wearing eye protection.
Applying the sealant will be done with a roller or a pump sprayer and if there are any puddles of the sealant on the deck, you will have to roll them out so that the sealant coats the deck evenly.
Drilling a few small holes in your deck where water collects can also help further waterproof it. This will let the water drain off of the deck in these areas. They can be as big or as small as you want them to be, although 3/16 of an inch is about the smallest you can get that will allow for a decent amount of drainage.
Jim Corkern is a writer and promoter of quality
Texas Residential Water Damage Restoration Contractors and
Water Damage Restoration companies across the united states.
Repairing Tile Grout to Prevent Water Damage
Sometimes the tile on the floor and the walls in our bathrooms can become cracked over time and not only is it unattractive, but when we continue to get water on this tile, it seeps underneath it and damages the wooden floor holding it up. Repairing this damage to the wood underneath your tile can be expensive, since all the tile must be taken up in order to get to it. Repairing tile on your own is not a difficult job to do and if you do it correctly, you can even take up the tile later if it is not to your liking and replace the tile in the entire bathroom. Learning how to repair grout, however, is a first step.
Even if the tile itself is not cracked, sometimes grout will be missing, especially if the home is old. Grout comes in a few different types: sanded, unsanded, acrylic or epoxy. Depending on the type of tile you have in your bathroom, you will want to use one over the other. Sanded grout should not be used with marble tiles, since this will scratch the marble. Acrylic latex grout or unsanded grout should be used. The grout should be mixed according to the manufacturer’s instructions and the area you wish to replace needs to be cleaned out with a mixture of vinegar and water. A grout saw can be used to remove the rest of the damaged or loose grout. Do not chip the tile. The joints should be dampened with water and a paper towel used to remove water puddles in between the tiles. Fill in the joints with the grout completely and the joint’s surface should be smoothed out with a rounded stick. A damp sponge can be used to remove the excess.
The grout should be allowed to set firmly. The instructions on the package should tell you how long this should take. Since this is in a bathroom, a grout sealant should be applied after the grout completely dries.
After it dries and the grout sealant is in place, cleaning it with a damp rag is recommended. A cloudy haze should appear on the tile after it dries again and a dry towel can be used to remove this.
Replacing the grout in between the tile in your bathroom will help prevent water damage from occurring to the floor underneath and save you quite a bit of money in the long run. Hiring a professional is not always necessary and you can save money by learning how to do small home improvement projects like this yourself.
Jim Corkern is a writer and promoter of quality
flood water damage restoration chicago and
mold remediation companies across the united states.
Even if the tile itself is not cracked, sometimes grout will be missing, especially if the home is old. Grout comes in a few different types: sanded, unsanded, acrylic or epoxy. Depending on the type of tile you have in your bathroom, you will want to use one over the other. Sanded grout should not be used with marble tiles, since this will scratch the marble. Acrylic latex grout or unsanded grout should be used. The grout should be mixed according to the manufacturer’s instructions and the area you wish to replace needs to be cleaned out with a mixture of vinegar and water. A grout saw can be used to remove the rest of the damaged or loose grout. Do not chip the tile. The joints should be dampened with water and a paper towel used to remove water puddles in between the tiles. Fill in the joints with the grout completely and the joint’s surface should be smoothed out with a rounded stick. A damp sponge can be used to remove the excess.
The grout should be allowed to set firmly. The instructions on the package should tell you how long this should take. Since this is in a bathroom, a grout sealant should be applied after the grout completely dries.
After it dries and the grout sealant is in place, cleaning it with a damp rag is recommended. A cloudy haze should appear on the tile after it dries again and a dry towel can be used to remove this.
Replacing the grout in between the tile in your bathroom will help prevent water damage from occurring to the floor underneath and save you quite a bit of money in the long run. Hiring a professional is not always necessary and you can save money by learning how to do small home improvement projects like this yourself.
Jim Corkern is a writer and promoter of quality
flood water damage restoration chicago and
mold remediation companies across the united states.
Subscribe to:
Posts (Atom)
